top of page

Pressure Washing Tips and Techniques in Cherry Hill, NJ

Pressure washing is an effective method for cleaning various surfaces, including concrete, wood, siding, and more. However, to achieve the best results and prevent damage, it's important to employ the appropriate techniques and use the right pressure and nozzles for each cleaning task. In this article, we will discuss different techniques for various surfaces, determining the appropriate pressure and nozzle, tips for removing stubborn stains, oil, grease, and graffiti, as well as preparing the area before pressure washing and cleaning up afterward.

However, it is important to note that pressure washing requires proper technique and caution. The high-pressure water spray can be powerful enough to damage certain delicate surfaces, such as wood or certain types of siding. Therefore, it is recommended to hire a professional pressure washing service or thoroughly educate yourself on the proper usage and safety precautions if you decide to undertake pressure washing tasks on your own.

1. Techniques for Various Surfaces:

a. Concrete: Start by sweeping the area to remove loose dirt and debris. Use a high-pressure nozzle and hold it at a consistent distance from the surface, usually around 12 to 18 inches. Work in overlapping sections and use a back-and-forth motion to ensure even cleaning. Avoid directing the stream at sharp angles or edges to prevent damage.

b. Wood: For wooden surfaces such as decks or fences, use a wider spray pattern nozzle to minimize the pressure and prevent splintering or etching. Keep the nozzle approximately 2 feet away from the wood and maintain a steady motion along the grain. Be cautious not to linger in one spot for too long, as it can damage the wood fibers.

c. Siding: Use a low-pressure nozzle and a wider spray pattern to prevent damage to the siding. Start from the bottom and work your way up, overlapping the sections to ensure thorough cleaning. Avoid spraying water directly into gaps or under the siding, as it can cause moisture issues.

2. Determining the Appropriate Pressure and Nozzle:

Choosing the correct pressure and nozzle is crucial to prevent surface damage. Consult the manufacturer's guidelines for your pressure washer to determine the recommended pressure settings. As a general rule, higher pressures are suitable for tougher stains and concrete, while lower pressures are more suitable for delicate surfaces like wood or siding. Experiment with different nozzles to find the one that provides the desired cleaning power without causing damage.

3. Removing Stubborn Stains, Oil, Grease, and Graffiti:

a. Stubborn Stains: Pre-treat stains with a suitable cleaning solution before pressure washing. Allow the solution to penetrate the stain for a few minutes, then apply gentle pressure to remove the stain. Repeat if necessary.

b. Oil and Grease: Use a degreasing agent or a mixture of detergent and warm water to pretreat oil and grease stains. Allow the solution to sit for a few minutes, then use a higher-pressure nozzle and direct the spray at an angle to lift the stain.

c. Graffiti: Graffiti can be challenging to remove. Start with low-pressure washing to avoid etching the surface. If the graffiti persists, use a specialized graffiti remover or consult a professional for assistance.

4. Preparing the Area and Cleanup:

Before pressure washing, remove any loose objects or debris from the area to prevent accidents and damage. Cover nearby plants and sensitive surfaces with plastic sheeting. Afterward, rinse the area with water to remove any remaining cleaning solutions or debris. Properly dispose of any chemicals used according to local regulations.

Frequently Asked Questions about Pressure Washing

Pressure washing is a highly effective method for cleaning a wide range of surfaces. Whether you're dealing with dirt, grime, mold, or other stubborn stains, pressure washing can provide a thorough and efficient cleaning solution. However, if you're new to pressure washing or have some questions about the process, we've got you covered. In this blog post, we'll address some of the most frequently asked questions about pressure washing.

1. What is pressure washing?

Pressure washing, also known as power washing, is a cleaning method that utilizes high-pressure water spray to remove dirt, grime, mold, mildew, and other contaminants from various surfaces. It involves using a specialized machine that generates high-pressure water, which is then directed onto the surface being cleaned.

2. What surfaces can be pressure washed?

Pressure washing can be used on a wide range of surfaces, including concrete, brick, stone, wood, vinyl, metal, and many others. It is commonly used for cleaning driveways, sidewalks, decks, fences, siding, roofs, and outdoor furniture, among other things.

3. Is pressure washing safe for all surfaces?

While pressure washing is generally safe for most surfaces, it's important to use the appropriate pressure and technique for each specific material. Some delicate surfaces, such as certain types of wood or painted surfaces, may require lower pressure or additional precautions to avoid damage. It's best to consult a professional pressure-washing company to ensure the safety and effectiveness of the cleaning process.

4. Can pressure washing remove tough stains?

Yes, pressure washing is highly effective at removing tough stains, including oil stains, rust stains, mold, and mildew. The high-pressure water spray, combined with specialized cleaning solutions if necessary, can effectively break down and remove even the most stubborn stains from surfaces.

5. Is pressure washing environmentally friendly?

Pressure washing can be environmentally friendly when performed correctly. By using eco-friendly cleaning solutions and adhering to local regulations regarding wastewater disposal, pressure washing can minimize its impact on the environment. Professional pressure washing companies are knowledgeable about environmentally friendly practices and can ensure proper waste management during the cleaning process.


When it comes to professional pressure washing services in Cherry Hill, NJ, GreenWay Pressure Washing is your go-to solution. Our team of highly skilled and experienced technicians is equipped with state-of-the-art pressure-washing equipment to deliver exceptional results. We understand the importance of maintaining clean and pristine surfaces, whether it's your home, business, or outdoor living spaces.

By choosing GreenWay Pressure Washing for your pressure washing needs, you can expect top-quality service, attention to detail, and a commitment to customer satisfaction. Our team is trained to handle a variety of surfaces and stains, ensuring that your property looks its best. We prioritize the use of environmentally friendly cleaning solutions and follow all necessary guidelines to minimize our impact on the environment.

Don't let dirt, grime, or stains detract from the beauty and cleanliness of your property. Contact GreenWay Pressure Washing today and experience the transformative power of professional pressure washing. Let us help you restore the brilliance of your surfaces and make them look as good as new.

For more information about GreenWay Pressure Washing and or to get a free quote for house washing, pressure washing, power washing, roof cleaning, paver cleaning and sealing, rust removal, and window cleaning, visit our website or call us at 856-512-0008. We strive to be the best pressure washing in Cherry Hill, NJ. You can trust GreenWay Pressure Washing to always provide satisfaction and guaranteed pressure washing.


bottom of page